acsss_config | run configuration script |
bpdb.acsss | backup acsls database |
cmd_proc_shell | provide shell access to the cmd_proc |
config drives <panel_id> | dynamically enables the addition, changes or delete drive type |
db_command start|stop | start or stop database |
db_export.sh -f db_file | to migrate acsls database to another version |
db_import.sh -f db_file | Import acsls database from another version |
del_vol | delete volume from an offline lsm |
drives_media.sh | display all drives types, media types and drive-to-media compatibility |
find_tty.sh | identify any available port that can be used by acsss |
get_license_info | display details on the installed license |
greplog | utility to filter acsss_event.log |
kill.acsss | terminate acsls |
rc.acsss | start acsls |
rdb.acsss | restore/recover acsls database |
bdb.acsss -f /dev/rmt/2 | backup database to specific tape |
bdb.acsss -f db_file | backup database to specific file |
stats_report | gather library volume statistical information |
volrpt | create volume report |
watch_vols | automatically assign ownership and pool association to volume as they are entered trough the CAP |
idle | stops acsls from processing new request |
set cap mode automatic|manual | change cap mode to automatic or manual exp: set cap mode automatic 0,0,1 |
set cap priority <0-16> | Exp. set cap priority 16 0,0,1 |
Audit Exp. audit 0,0,1 lsm 0,0 audit 0,0,1 panel 0,1,12 | update acsls database to match the actual inventory of library volumes. to audit lsm 0,0 and specify cap 0,0,1 for ejection to audit panel 12 and specify cap 0,0,1 for ejection |
query request all | to display request IDs for all current and pending request |
query volume DX123 | query specific volume |
cancel <request_id> | cancels a current or pending request |
clear lock Exp. clear lock drive 0,0,10,0 | to remove all active and pending locks on specific tranport or volume clear lock for drive 0,0,10,0 |
mount <vol_id> <drive_id> | Mount specific volume to specific drive Exp. mount clnu001 0,0,10,0 |
Dismount <vol_id> <drive_id> | dismount specific volume from specific drive exp. dismount EDU200 0,0,10,1 |
move <vol_id> <lsm_id> | move a specified volume to an available storage cell |
eject <cap_id> <vol_id> | eject specific volume to specific cap |
eject <vol_range> enter<cap_id> | Exp. eject EDU2000-EDU2050 insert/import cartridge to library from specific cap |
venter | make a cap ready to enter unlabelled cartridge (L5500, SL500 and SL8500 do not support unlabelled cartridge) |
set clean <max_usage> exp. set clean 50 CLNU001 set clean off CLNU001 | set the maximum usage of cleaning cartridge set the maximum use to 50 set cleaning cartridge atribute off |
set owner <owner_id> volume <vol_id> | volrange | set volume ownership |
set scratch [off] <pool_id> <vol_id> | volrange | set or clear a volume scratch attribute and assign the volume to a pool |
switch lmu <acs_id> | manually switch lmu (on dual lmu configuration) |
logoff | exit from cmd_proc |
Other command:
———————
vary acs 0 offline|online
vary lsm 0,0 offline|online
vary port 0,0 0,1 offline|online
vary drive 0,0,10,0 offline|online
display cap 1,1,1
display drive 0,0,10,* -f type serial_num
display drive 0,0,10,* -status available
display cell
display lock
display lsm
display panel
display pool
display port
display volume
query acs all
query lsm all
query server
query port all
query clean all
query cap all
query drive all
query server
query lmu
query lock
query scratch
————–
$testlmu >>send a test packet from acsls to LMU (port must be offline to acsls)
$probe-scsi.sh >>send a scsi inquiry test packet to scsi-attached lsm
$probe-scsi.sh /dev/mchanger0
$testports >>test libary connection (will not work while acsls running)
$ck_port_node.sh >>for solaris only
$lsdev -C -c tty >>AIX
$lsdev -C -s scsi
No comments:
Post a Comment